Re: Prism2 Host AP - new release 2002-04-10


From: Vladimir Ivaschenko (hazard_at_hazard.maks.net)
Date: 2002-04-11 15:36:08 UTC


I suggest to enter key in HEX. I had better success with HEX in the past when I used different brands of cards.

However, I never actually tested WEP with Host AP. ;)

Thu, Apr 11, 2002 at 11:12:08AM -0400 David Levitan wrote about Re: Prism2 Host AP - new release 2002-04-10

> I did. Typed in "iwconfig wlan0 key s:1234567" (well, not that exact
> string, but close enough). Also put in "iwconfig wlan0 key restricted".
> Then tried to connect from a windows laptop using both 64 bit and 128
> bit encryption (with the same string key), and no luck. I haven't had a
> chance to really play around with it, and I'll be away for the next few
> days, so I'll report my results next week probably. However, what's the
> difference between 64 and 128 bit encryption? On the windows client, I
> can set it to either. But I haven't found a setting on linux.
> Thanks,
> David Levitan
>
> Vladimir Ivaschenko wrote:
> > Did you try standard iwconfig commands for enabling WEP?
> >
> > Wed, Apr 10, 2002 at 08:32:20PM -0400 David Levitan wrote about Re: Prism2 Host AP - new release 2002-04-10
> >
> >
> >>quick question: How do I enable a 40 bit key and how do I enable a
> >>104bit key? I couldn't find anything in any documentation.
> >>Thanks,
> >>David Levitan
> >>
> >>Jouni Malinen wrote:
> >> > A new version of Prism2 Host AP driver was just released and it is now
> >> > available from http://people.ssh.com/jkm/Prism2/
> >> >
> >> >
> >> > 2002-04-10
> >> >
> >> > * fixed compilation with older Linux wireless extension versions
> >> > (at least version 9 is now required for most wireless extensions)
> >> > * kernel driver AP functionality code cleanup
> >> > * try to send broadcast deauthentication frames when shutting down
> >> > * use smaller default inactivity timeout with stations (5 min)
> >> > * send disassociation when 3/4 of inactivity timeout has passed and
> >> > deauthentication when full timeout has passed
> >> > * added support for WEP in Host AP mode
> >> > - card firmware is used to decrypt frames (it seems to work fine)
> >> > - encryption is performed in host driver since firmware does not
> >> > seem to want to encrypt frames correctly when in Host AP mode
> >> > - use 'restricted' as default WEP mode instead of 'open'
> >> > - WEP keys are saved in driver data, so SIOCGIWENCODE is now
> >> > returning real values and not the bogus values firmware returned
> >> > - 40-bit and 104-bit WEP seems to now be working properly in Host AP
> >> > mode (both with stations and with WDS links); (note that if
> >> > 104-bit WEP is used, station firmware on AP must support 104-bit
> >> > WEP in order to decrypt frames)
> >> > * fixed a bug in fake-WDS frame generation
> >> > - if payload len was odd, the addr4 was broken in RX frames
> >> > * drop RX packets that have ToDS flag but wrong BSSID and RX packets
> >> > that have FromDS flag (these frames are usually broadcast/multicast
> >> > frames in other BSSes)
> >> >
> >> >
> >>
> >>
> >>
> >>
> >
>
>
>
>

-- 
Best Regards
Vladimir Ivaschenko
http://www.hazard.maks.net/~hazard


This archive was generated by hypermail 2.1.4.