difficulty w/ dwl-500/650


From: jason (rohwedde_at_codegrinder.com)
Date: 2002-04-01 02:52:02 UTC



I saw something similar in the archives to this list .. but I'm having problems getting the 650 to work through the 500 pci bridge.. i've tried this in most every configuration i can think of but here's the current one..

any assistance would be appreciated

-j

2.4.17 kernel
using pcmcia-cs-3.1.33 for pcmcia

this is all on top of debian unstable w/o the pcmcia deb installed

PCIC_OPTS="irq_mode=0"

my wireless.opts

include port 0x100-0x4ff, port 0x800-0x8ff, port 0xc00-0xcff include memory 0xc0000-0xfffff
include memory 0xfb000000-0xfbffffff, memory 0x60000000-0x60ffffff
# Extra port range for IBM Token Ring

include port 0xa00-0xaff
# Resources we should not use, even if they appear to be available
# First built-in serial port

exclude irq 4
# Second built-in serial port
#exclude irq 3
# First built-in parallel port

exclude irq 7

the odd memory bit was required to get it to find the pci bridge properly

### Error Message ####

Starting PCMCIA services: modules cardmgr. cardmgr[375]: watching 1 sockets
bucky:/var/log# Mar 31 16:50:55 bucky kernel: Linux PCMCIA Card Services 3.1.33
Mar 31 16:50:55 bucky kernel: kernel build: 2.4.17 #3 SMP Sun Mar 31 15:34:59 CST 2002

Mar 31 16:50:55 bucky kernel:   options:  [pci] [cardbus]
Mar 31 16:50:55 bucky kernel: Intel ISA/PCI/CardBus PCIC probe:
Mar 31 16:50:55 bucky kernel: PCI: Found IRQ 10 for device 00:0d.0
Mar 31 16:50:55 bucky kernel:   Ricoh RL5C475 rev 80 PCI-to-CardBus at slot
00:0d, mem 0x10000000
Mar 31 16:50:55 bucky kernel:     host opts [0]: [pci only] [io 3/6/1] [mem
3/6/1] [pci irq 10] [lat 32/176] [bus 3/6]
Mar 31 16:50:55 bucky kernel:     PCI card interrupts, PCI status changes
Mar 31 16:50:55 bucky cardmgr[375]: watching 1 sockets
Mar 31 16:50:55 bucky cardmgr[376]: starting, version is 3.1.33
Mar 31 16:50:56 bucky kernel: cs: memory probe 0xfb000000-0xfbffffff: clean. Mar 31 16:50:56 bucky cardmgr[376]: socket 0: D-Link DWL-650 11Mbps WLAN Card
Mar 31 16:50:56 bucky cardmgr[376]: executing: 'modprobe prism2' Mar 31 16:50:56 bucky kernel: prism2: prism2.c 0.0.0 2002-03-27 (SSH Communications Security Corp, Jouni Malinen) Mar 31 16:50:56 bucky kernel: prism2: (c) SSH Communications Security Corp <jkm_at_ssh.com>
Mar 31 16:50:56 bucky kernel: prism2: CardServices release does not match! Mar 31 16:50:56 bucky cardmgr[376]: + /lib/modules/2.4.17/pcmcia/prism2.o: init_module: Operation not permitted
Mar 31 16:50:56 bucky cardmgr[376]: + /lib/modules/2.4.17/pcmcia/prism2.o: insmod /lib/modules/2.4.17/pcmcia/prism2.o failed Mar 31 16:50:56 bucky cardmgr[376]: + /lib/modules/2.4.17/pcmcia/prism2.o: insmod prism2 failed
Mar 31 16:50:56 bucky cardmgr[376]: + Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters Mar 31 16:50:56 bucky cardmgr[376]: modprobe exited with status 255 Mar 31 16:50:56 bucky cardmgr[376]: executing: 'insmod /lib/modules/2.4.17/pcmcia/prism2.o'
Mar 31 16:50:56 bucky kernel: prism2: prism2.c 0.0.0 2002-03-27 (SSH Communications Security Corp, Jouni Malinen) Mar 31 16:50:56 bucky kernel: prism2: (c) SSH Communications Security Corp <jkm_at_ssh.com>
Mar 31 16:50:56 bucky kernel: prism2: CardServices release does not match! Mar 31 16:50:56 bucky cardmgr[376]: + /lib/modules/2.4.17/pcmcia/prism2.o: init_module: Operation not permitted
Mar 31 16:50:56 bucky cardmgr[376]: + Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters Mar 31 16:50:56 bucky cardmgr[376]: insmod exited with status 1 Mar 31 16:50:57 bucky cardmgr[376]: get dev info on socket 0 failed: Resource temporarily unavailable
Mar 31 16:50:57 bucky cardmgr[376]: wrong module 'prism2' for device 'prism2'?

This archive was generated by hypermail 2.1.4.