Re: range problem with 2 wl100 cards


From: rob_at_mur.org.uk
Date: 2002-01-22 18:58:28 UTC



Hi

I installed hostap on the laptop, but it didn't make any difference. I set the sbc and the laptop to adhoc mode, and the range improved a lot. Something strange is happening with the sbc now though, I don't think I changed anything, appart from pcmcia being loaded in /etc/rc.d. What does the below mean?

prism2: prism2.c 0.0.0 2002-01-03 (SSH Communications Security Corp, Jouni Malin en)

prism2: (c) SSH Communications Security Corp <jkm_at_ssh.com>
prism2: setting Vcc=33 (constant)
prism2: CS_EVENT_CARD_INSERTION

prism2_config()
prism2: setting Vcc=33 (from config)
CISTPL_MANFID: 0x0138, 0x0002
Checking CFTABLE_ENTRY 0x01 (default 0x01) IO window settings: cfg->io.nwin=1 dflt.io.nwin=1 io->flags = 0x0046, io.base=0x0000, len=64 prism2: RequestIRQ: Resource in use
prism2_release
release -> prism2_hw_shutdown
prism2: card not configured
release <- prism2_hw_shutdown
release: CardServices(Release*) done
release - done
prism2_detach
prism2: link->dev == NULL: do not unregister netdevice

Cheers

-- 
Rob Murray


This archive was generated by hypermail 2.1.4.